Gas Continuous Flow Hot Water Systems
Tap Doctor Plumbing & Gas, trusted since 1985
Repairs, servicing, replacement and new installs of instant gas hot water systems, on natural gas and LPG. We agree a firm price before we pick up the tools, and there’s no call-out fee during business hours.
- 1Tell us what needs doing
- 2Pick a day and time that suits
- 3We confirm and send a licensed Tap Doctor gasfitter
- 4Job done, problem solved
- Trusted since 1985
- Fully Licensed & Insured
- No call-out fee in business hours
- Locally Based Plumbers
- ★★★★★2,000+ Google reviews
- Trusted since 1985
- Licensed gasfitters and plumbers
- Natural gas and LPG
- Phones answered 24/7
No hot water from your instant gas system? Check this first
A few quick checks can save a call-out. If none of them helps, or you smell gas, call us. Our phones are answered 24 hours a day, 7 days a week.

Quick checks
- Is there power? Most units need a power point for the ignition. Check the plug and the circuit at the switchboard.
- Is there gas? Check that other gas appliances work, and that an LPG bottle isn’t empty.
- Is there an error code? Write down the code on the controller or the unit and tell us when you call.
- Turn the hot tap on further. A trickle may be below the flow the unit needs to stay lit.
Smell gas? Do this now
- Turn the gas off at the meter, or close the valve on your LPG bottle
- Open doors and windows
- Don’t use light switches, phones or anything with a flame
- Go outside and call 1300-655-827. If the smell is strong, call 000 first
After-hours call-out fees vary based on the day, time and location.
Call 24/7: 1300-655-827Continuous flow repairs, servicing and installation
Our licensed gasfitters and plumbers repair, service, replace and install gas continuous flow (instant) hot water systems, on natural gas and LPG, including Bosch, Rinnai, Rheem and Dux. For every type of hot water system, see our hot water systems page →

Continuous flow repairs More →
No hot water, error codes, units that won’t ignite or keep cutting out, and leaks from the unit. We find the fault and tell you whether a repair or a replacement makes more sense.
Replacement More →
An old or failed instant unit replaced like for like, or with a bigger or more efficient model, and the old unit taken away.
Storage tank to continuous flow More →
Swapping a gas storage tank for an instant unit, with the gas line checked and upsized if the new unit needs more gas.
Servicing
Water inlet filters cleaned, burner and ignition checked, and the unit checked for gas and water leaks.
Poor flow or temperature More →
Water that runs hot and cold, weak flow at the shower, or a tempering valve that needs replacing.
Gas supply and LPG More →
Gas lines, regulators and LPG bottle connections for instant units, done by a licensed gasfitter.
Switching from a storage tank to continuous flow
Changing a gas storage tank for a continuous flow unit is one of the most common hot water jobs we do. There’s no tank to run out or keep hot, and the unit mounts on the wall.

Gas supply checked first
An instant unit can need more gas than a storage tank. Your gasfitter checks the meter and gas line size before giving you a price, and includes any upsizing in it.
Where it goes
Most units mount on an outside wall near the old tank, so the pipe work stays short. Your plumber checks the clearances the unit needs.
Power
Most continuous flow units need a power point nearby for the controls and ignition.
Sizing
Units are sized in litres per minute. As a rough guide, 16 L suits a smaller home, 20 L a home with up to two bathrooms, and 26 L a larger home.
Moving off electric
If you have an electric tank and mains gas at the house, continuous flow is worth pricing alongside a like-for-like electric replacement.
Old tank removed
The old system is disconnected, removed and taken away.
Why people call Tap Doctor for continuous flow hot water
Instant gas hot water is gas work and plumbing work in one job. This is how we handle it.

Licensed gasfitters
The gas side is done by a licensed gasfitter, and every gas connection is leak tested before we leave.
Repair first, if it’s worth it
If a part will get your unit going again, we tell you, rather than pushing a new system.
A firm price before any work starts
Your gasfitter explains what’s needed and gives you a firm price. Nothing starts until you say yes.
No call-out fee in business hours
You don’t pay for us to turn up and look. If you decide not to go ahead, you owe nothing during business hours.
Natural gas and LPG
Mains gas or bottled gas, we work on both.
Trusted since 1985
Tap Doctor has been fixing hot water systems since 1985, and our customers have left more than 2,000 Google reviews.
How pricing works for continuous flow hot water
A failed sensor, a service and a full storage-to-instant changeover are very different jobs, and a changeover depends on your gas supply. So instead of guessing over the phone, a licensed gasfitter looks at the job and gives you a firm price before any work starts.

No call-out fee in business hours
You don’t pay for us to turn up and look. If you decide not to go ahead, there’s nothing to pay during business hours.
A firm price before work starts
Your plumber looks at the job on site, explains what’s needed and gives you a firm price. Nothing starts until you agree.
No obligation
The price is yours to think about. Say yes, ask questions, or leave it there.
Further work quoted first
If we find something else that needs doing, we stop and quote it before any of it is done.
Pay when the job is done
Cash, credit or debit card, or bank transfer with Osko, collected when the work is finished.
After hours
Our phones are answered 24/7. After-hours call-out fees vary based on the day, time and location, and we tell you on the phone.
How to choose a continuous flow installer
Whoever you call, these are the checks worth making. Here’s how we measure up against each one.

What customers say about our continuous flow work
“The boys from Tap Doctor were prompt and professional. They removed the old non-functioning unit and installed a new Continuous flow unit in a very timely manner.”
“So easy to deal with. Had a Rinnai Instantaneous swap over for a gas Storage. Professional job and the installers were fantastic especially Mitch.”
“Had a Rheem 27 ICF hot water system failure (error code 11). Joseph and Nathan from Tap Doctors (South) arrived as arranged, and completed a quick site survey finding a leak below the controller conduit and diagnosed a likely heat exchanger failure.”
“Chris from tap doctor called and offered to do the replacement of my instant hot water system a day earlier than had been planned. He completed the replacement very quickly and also found a clogged restriction filter that was causing poor flow and pressure in the shower.”
“A huge thankyou to Jimmy for fitting our new gas instant HWS. Great young guy, nothing too much trouble.”
“A huge thank you to Nathan and Will from Tap Doctors South for the outstanding job they did replacing my instantaneous hot water system.”
Local gasfitters and plumbers, since 1985
Tap Doctor Plumbing & Gas has been repairing and installing hot water systems since 1985. Our plumbers and gasfitters live and work in the areas they cover, so there’s usually someone close by, and our phones are answered 24/7.
More on hot water: hot water system repairs, hot water system replacement and all hot water systems.
- Perth
- Plumbers and gasfitters in Perth →
- Mandurah
- Plumbers in Mandurah →
- Canberra
- Plumbers in Canberra →
- Gladstone
- Plumbers in Gladstone →
- Phone
- 1300-655-827, 24/7
Continuous flow hot water FAQs
What is a continuous flow hot water system?
A continuous flow (instant or instantaneous) system heats water with gas only when you turn on a hot tap. There’s no storage tank to heat up or run out, so the hot water keeps coming as long as the tap is on.
My continuous flow system is showing an error code. What should I do?
Write down the code shown on the controller or the unit and tell us when you call. Codes point to faults such as ignition problems, gas supply issues or a failed part. Don’t keep resetting the unit if the code keeps coming back.
Why does my instant hot water go cold in the shower?
Common causes are a flow too low for the unit to stay lit, a blocked water filter, an empty LPG bottle, too many hot taps on at once for the unit’s size, or a failing part. A gasfitter can find which one it is.
Can I switch from a gas storage tank to continuous flow?
Yes. It’s one of the most common changes we make. An instant unit sometimes needs a bigger gas line than a storage tank, so we check the gas supply before we give you a price.
What size continuous flow system do I need?
Units are sized by litres per minute. As a rough guide, a 16 L unit suits a smaller home, a 20 L unit suits a home with up to two bathrooms, and a 26 L unit suits a larger home where several hot taps run at once.
Does a continuous flow system need power?
Most gas continuous flow units need a power point for the controls and ignition, so they won’t heat water during a power cut.
Do continuous flow systems need servicing?
Yes. Check your manual for the interval. A service includes cleaning the water inlet filter, checking the burner and ignition, and checking for gas and water leaks.
Which brands do you work on?
We repair, service and install continuous flow systems from Bosch, Rinnai, Rheem and Dux. See also Rheem hot water systems.
Do you take the old hot water system away?
Yes. When we replace a hot water system we can remove the old unit and take it away.
No hot water, or ready for continuous flow?
Book online in under 2 minutes, or call us any time.

